• Long stroke production with low friction, low mechanical loss and lightweight in the same manner as the Non Fric Cylinder
• High accuracy, high rigidity
• Extremely robust to unbalanced loads
• High loads can be added to the cylinder lot (Linear guide).
• The piston part is integrated with the linear guide using ball bush.

• Dancer control device for web transport line
• Reeling machine touch roll
• Shock absorber

• Operating pressure range     0.01~0.3MPa             　　
• Gas use 　　　　　　　　　Cleaned air
• Temperature/Humidity 　　20~25°C/Under 50% RH
• Lubricant/Moisture　　　　Unavailable
• Initial pressure 　　　　　    0.2kPa for LGAC-40-100
• Working pressure                    1kPa for LGAC-40-100

Cylinder diameter：φ21~60 mm (standard) Other sizes larger than φ60 mm are also available (custom-made).

Stroke：50 mm pitch (see our website for details)

Shaft material：SUJ-2 (Hard chrome)

Outer cylinder material：CFRP (Carbon Fiber Reinforced Plastic)

F=Ap

F： Thrust (N)

A：Piston pressure receiving area (mm2)

D：Cylinder inside diameter (Bore diameter) (mm)

p：Working pressure (Mpa)

• The device can be installed either vertically or horizontally when in use.
• It must not be used in parallel except for special purposes.

Please be advised that some dimensions will be revised for orders placed on or after April 1, 2026.

For details of the changes, please refer to the following documents: